Dòng
|
Nội dung
|
1
|
Enhanced adsorption of methylene blue onto graphene oxide-doped XFe2O4 (X = Co, Mn, Ni) nanocomposites: kinetic, isothermal, thermodynamic and recyclability studies / Bach Long Giang, Tran Van Thuan, Trinh Duy Nguyen, Pham Van Thinh, Do Sy Trung // Research on Chemical Intermediates. - . - Vol. 44 (2018), P.1661-1687. - ISSN:
Switzerland : Springer Nature Switzerland AG, 2018 29 p. Ký hiệu phân loại (DDC): 542 The nanocomposites XFe2O4/GO with various metal sites (X = Co, Mn, and Ni) were successfully synthesized via the polymerized complex method. The XFe2O4/GO family was characterized using X-Ray diffraction analysis, scanning electron microscopy (SEM), and a vibrating sample magnetometer. We also investigated the effect of three fundamental parameters (initial concentration, dosage, and pH) on the removal of methylene blue using the response surface methodology. A high F value, very low P value (< 0.00001), a non-significant lack of fit, and the determination coefficient (R 2 > 0.95) demonstrated a strong correlation between experimental and predicted values of the responses. The predicted optimal conditions for maximum removal efficiency were easily determined to adhere to the following trend for actual test experiments: MnFe2O4/GO (60.1%) < CoFe2O4/GO (80.3%) < NiFe2O4/GO (87.7%). Moreover, the adsorption behavior was well-described by the Langmuir isotherm and a pseudo-second-order kinetic model. The maximum capacity for adsorption of methylene blue onto XFe2O4/GO was found from 42.2 to 80.6 mg/g. Moreover, the XFe2O4/GO could be regenerated for several cycles without a considerable decrease in removal yield, suggesting that this highly promising XFe2O4/GO could be applied as an efficient and novel adsorbent. Số bản sách:
(0)
Tài liệu số:
(1)
|
2
|
Removal of Cu2+ from aqueous water by adsorption onto the efficient and recyclable durian Shell-derived activated carbon / Long Giang Bach, Dai-Viet N. Vo, Nguyen Duy Trinh,
Van Thi Thanh Ho, Van Thuan Tran // Applied Mechanics and Materials. - . - Vol. 876 (2018), P.46-51. - ISSN:
Switzerland : Trans Tech Publications, 2018 6 p. Ký hiệu phân loại (DDC): 542 We investigated the use of durian shell-derived activated carbon (DSAC) for the removal of Cu2+. To determine the optimal condition for Cu2+ removal, the response surface methodology (RSM) was used to establish a second-order polynomial model with variables such as Cu2+ concentration (Ci), adsorbent dosage (dDSAC) and pH. With R2 = 0.9847 and P-value < 0.0001, the model was proved to be statistically significant. The RSM based confirmation test revealed that the removal of Cu2+ was maximum (99.6%) at optimal conditions: Ci = 61.6 mg/L, dDSAC = 5.0 g/L and pH = 5.2. Based on calculated R2, data fitness for adsorption isotherms were positioned as follows: Langmuir > Tempkin > Freundlich. In other words, monolayer adsorption was the most favorable behavior with maximum capacity of 76.92 mg/g from Langmuir model. Interestingly, DSAC was reused at least five times without a considerable decrease of Cu2+ removal efficiency. Therefore, durian shell can be used as a highly effective, reusable and promising raw material to fabricate the activated carbon. Số bản sách:
(0)
Tài liệu số:
(1)
|
|
|
|
|